Return form

NameTest Name
Phone0400000000
EmailTesting@gmail.com
Address6 Mill Road Buderim
Estimated start dateFebruary 19, 2021
Same as insured customerYes
Work order forQAT
Work order number600000
Is edge protection neededNo
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
Is the system operationalYes
System output in watts600
Time of recording6:30 am
WeatherSunny
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts300
Inverter 1 brandOMNIK
Inverter 1 Serial NumberAUEN3020153G4095
Does the inverter need replacement?No
String voltage300
String amps1
String voltage200
String amps1.5
Isolated before work?Yes
Roof typeTin
Roof Pitch0-15
Condition of whole roofGood
No. of array orientations1
Array 1 orientationNorth
No. of panels in array 13
Total no. panels3
Total PanelsTotal Number of Panels: 3
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandRec
Panel Brand 1 Panel output50
Calc system size150
Is racking re-usableYes
Number of isolator covers4
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?Yes
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesAditional Notes
Aditional Uploads
NameMatthew Snell
Phone0438031288
Emailmattysnell@gmail.com
Address21 Lanata Crescent, Mountain Creek QLD, Australia
Estimated start dateFebruary 17, 2021
Same as insured customerYes
Work order forOther SunSmart Sunshine Coast
Work order number00001
Is edge protection neededYes
Is scaffolding neededYes
Building layoutDouble Storey
Work order typeInspection
Is Make Safe approved if requiredYes
DateFebruary 17, 2021
Is the system operationalYes
System output in watts4000
Time of recording10:00 am
WeatherSunny
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts5000
Inverter 1 brandSamil
Inverter 1 Serial Number467uju66jjj
Does the inverter need replacement?Yes
Reason for replacementPower surge caused by lightning
String voltage300
String amps0
String voltage300
String amps0
Isolated before work?Yes
Roof typeTin
Roof Pitch0-15
Condition of whole roofExtreme Damage
Is the solar system affected?Direct Impact
No. of array orientations2
Array 1 orientationNorth
No. of panels in array 110
Array 2 orientationEast
No. of panels in array 210
Total no. panels20
Total PanelsTotal Number of Panels: 20
Does the system require a Make SafeNo
Inverter 1 MPPT 1 Configuration10
Inverter 1 MPPT 2 Configuration10
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandLONGi Green Energy Technology Co Ltd LR4-60HBD-360M
Panel Brand 1 Panel output370
Calc system size7400
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers2
Number of damaged isolator covers2
Photo of damaged Isolator Covers
Is the system up to current AS/NZS Standards?No
CablesNo earth
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamageOther
OtherNon
Do Inverter DC Isolators need replacingYes
Inverter DC Isolator DamageNon Compliant
Do AC Isolators need replacingNo
System un-isolated after workNo
Aditional NotesDhdhdje
Aditional Uploads
NameLeanne Griffith
Phone0411183027
Emailleannegriffith1961@gmail.com
Address72 Ningi Esp, Ningi QLD 4511, Australia
Estimated start dateFebruary 17, 2021
Same as insured customerYes
Work order forQAT
Work order number52536
Is edge protection neededYes
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateFebruary 17, 2021
Is the system operationalYes
System output in watts1350
Time of recording10:00 am
WeatherOvercast
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts5000
Inverter 1 brandSMA
Inverter 1 Serial Number2130138457
Does the inverter need replacement?No
String voltage360
String amps2.5
String voltage280
String amps6
Isolated before work?No
Roof typeTin
Roof Pitch15-30
Condition of whole roofGood
No. of array orientations2
Array 1 orientationWest
No. of panels in array 110
Array 2 orientationNorth
No. of panels in array 216
Total no. panels26
Total PanelsTotal Number of Panels: 26
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandConergy
Panel Brand 1 Panel output195
Calc system size5070
Is racking re-usableYes
Number of isolator covers2
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesNo rooftop isolators
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamageNon Compliant
Do Inverter DC Isolators need replacingYes
Inverter DC Isolator DamageNot water tight
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesThe panels don’t appear to be damaged however are in need of cleaning . Before I left the system was at 4kw with the sun out. No isolator covers and inverter isolator not glued
Aditional Uploads
NameDaryl Thompson
Phone0400718120
Emaildazzaexpress@yahoo.com.au
Address14 Wattle Grove Dr, Ningi QLD 4511, Australia
Estimated start dateFebruary 17, 2021
Same as insured customerYes
Work order forQAT
Work order number52527
Is edge protection neededYes
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateFebruary 17, 2021
Is the system operationalYes
System output in watts1300
Time of recording10:30 am
WeatherOvercast
How many inverters are installed2
Total no. phasesSingle
Inverter 1 size in watts1600
Inverter 1 brandSMA
Inverter 1 Serial Number2007347010
Does the inverter need replacement?No
String voltage190
String amps4
String voltage0
String amps0
Inverter 2 size in watts1500
Inverter 2 brandSolax
Inverter 2 Serial NumberS1521570510001
Does the inverter need replacement?No
String voltage170
String amps4.5
String voltage0
String amps0
Isolated before work?No
Roof typeTile
Roof Pitch0-15
Condition of whole roofGood
No. of array orientations1
Array 1 orientationNorth
No. of panels in array 118
Total no. panels18
Total PanelsTotal Number of Panels: 18
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands2
Panel Brand 1 BrandQZroll
Panel Brand 1 Panel output165
Panel Brand 2 BrandUlica
Panel Brand 2 Panel output165
Calc system size2970
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers2
Number of damaged isolator covers0
Photo of damaged Isolator Covers
Is the system up to current AS/NZS Standards?No
CablesNo isolator or covers. Exposed and open conduit
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamageNon Compliant
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesThere is a third panel called eco future which are 250w. Thermal camera shows hot spots on all panels.
Aditional Uploads
NamePeter Smith
Phone0428130344
Emailpandasmith44@bigpond.com
Address2-8 Wrenaus Way, NINGI QLD 4511
Estimated start dateFebruary 17, 2021
Same as insured customerYes
Work order forQAT
Work order number52841
Is edge protection neededNo
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateFebruary 17, 2021
Is the system operationalYes
System output in watts0
Time of recording11:30 am
WeatherCloudy
How many inverters are installed2
Total no. phases3 Phases
Inverter 1 size in watts2500
Inverter 1 brandPVEdge
Inverter 1 Serial Number031263035
Does the inverter need replacement?No
String voltage160
String amps0
String voltage0
String amps0
Inverter 2 size in watts2200
Inverter 2 brandPVEdge
Inverter 2 Serial Number061046307
Does the inverter need replacement?No
String voltage160
String amps0
String voltage0
String amps0
Isolated before work?Yes
Roof typeTin
Roof Pitch15-30
Condition of whole roofGood
No. of array orientations1
Array 1 orientationNorth
No. of panels in array 132
Total no. panels32
Total PanelsTotal Number of Panels: 32
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands2
Panel Brand 1 BrandTrina Solar
Panel Brand 1 Panel output180
Panel Brand 2 BrandCSun
Panel Brand 2 Panel output190
Calc system size5760
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers2
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesNo rooftop isolator on one system. No isolator covers.
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamageNon Compliant
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesInverters don’t show any running information, therefore making it difficult to test current and power. Thermal camera showed many hot spots on all the newer panels and a few on the older ones.
NameSheila Musgrave
Phone0448833805
Emailsheilaandroy@bigpond.com
Address22 Bass Ct, Banksia Beach QLD 4507, Australia
Estimated start dateFebruary 26, 2021
Same as insured customerYes
Work order forOther SunSmart Sunshine Coast
Work order numberSheilaMusgrave
Is edge protection neededYes
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateMarch 2, 2021
Is the system operationalYes
System output in watts1400
Time of recording12:30 pm
WeatherSunny
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts2000
Inverter 1 brandAurora
Inverter 1 Serial Number341617
Does the inverter need replacement?No
String voltage396
String amps4.8
String voltage0
String amps0
Isolated before work?Yes
Roof typeTile
Roof Pitch0-15
Condition of whole roofGood
No. of array orientations1
Array 1 orientationNorth
No. of panels in array 110
Total no. panels10
Total PanelsTotal Number of Panels: 10
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandTianwei
Panel Brand 1 Panel output190
Calc system size1900
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueCorrosion
Number of isolator covers1
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesNo earth or rooftop isolator
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesThermal camera shows many hot spots
Aditional Uploads
NameGail Foster
Phone0410575600
Emailtrolley_1@hotmail.com
Address91-93 Cocos Dr, Ningi QLD 4511, Australia
Estimated start dateMarch 2, 2021
Same as insured customerYes
Work order forQAT
Work order number52552
Is edge protection neededYes
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateMarch 2, 2021
Is the system operationalYes
System output in watts4000
Time of recording1:30 pm
WeatherSunny
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts5000
Inverter 1 brandZeversolar
Inverter 1 Serial NumberEL50000101550541
Does the inverter need replacement?No
String voltage282
String amps7.2
String voltage289
String amps7.2
Isolated before work?Yes
Roof typeTile
Roof Pitch0-15
Condition of whole roofGood
No. of array orientations1
Array 1 orientationNorth
No. of panels in array 124
Total no. panels24
Total PanelsTotal Number of Panels: 24
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandLuxen
Panel Brand 1 Panel output250
Calc system size6000
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueCorrosion
Number of isolator covers2
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesNo isolator covers
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingYes
AC Isolator DamageOther
OtherCan’t turn off
System un-isolated after workYes
Aditional NotesThermal camera shows hot spots on all panels
NameBruce & Lynette Keipert
Phone0408433519
Emailbhkeipert@msn.com.au
Address19-21 Hirst Court, Ningi QLD 4511, Australia
Estimated start dateMarch 2, 2021
Same as insured customerYes
Work order forQAT
Work order number52667
Is edge protection neededYes
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateMarch 2, 2021
Is the system operationalYes
System output in watts3500
Time of recording3:00 pm
WeatherSunny
How many inverters are installed2
Total no. phasesSingle
Inverter 1 size in watts5200
Inverter 1 brandSolax
Inverter 1 Serial NumberXB50218A061029
Does the inverter need replacement?No
String voltage293
String amps2.5
String voltage359
String amps8.1
Inverter 2 size in watts1650
Inverter 2 brandSolax
Inverter 2 Serial NumberXM152184244035
Does the inverter need replacement?No
String voltage327
String amps4
String voltage0
String amps0
Isolated before work?Yes
Roof typeTin
Roof Pitch15-30
Condition of whole roofMinor Damage
Is the solar system affected?Indirect Impact
No. of array orientations3
Array 1 orientationWest
No. of panels in array 113
Array 2 orientationNorth
No. of panels in array 28
Array 3 orientationEast
No. of panels in array 310
Total no. panels31
Total PanelsTotal Number of Panels: 31
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands2
Panel Brand 1 BrandAstronergy
Panel Brand 1 Panel output285
Panel Brand 2 BrandPhono
Panel Brand 2 Panel output195
Calc system size8835
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers2
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesOne array doesn’t have an isolator
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesThermal camera shows hotspots on all panels
Aditional Uploads
NameAmanda & Warren Freeman
Phone0419430833
Emailfreemansclan@bigpond.com
Address12-14 Muldoon Place, Ningi QLD 4511
Estimated start dateApril 24, 2021
Same as insured customerYes
Work order forQAT
Work order number52861
Is edge protection neededYes
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateApril 24, 2021
Is the system operationalYes
System output in watts445
Time of recording9:00 am
WeatherSunny
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts1500
Inverter 1 brandFronius
Inverter 1 Serial Number29471627
Does the inverter need replacement?No
String voltage173
String amps3.12
String voltage0
String amps0
Isolated before work?Yes
Roof typeTin
Roof Pitch15-30
Condition of whole roofMinor Damage
Is the solar system affected?Indirect Impact
No. of array orientations1
Array 1 orientationWest
No. of panels in array 15
Total no. panels5
Total PanelsTotal Number of Panels: 5
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandJinko
Panel Brand 1 Panel output330
Calc system size1650
Is racking re-usableYes
Number of isolator covers1
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?Yes
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
NameAshley & Melissa Turner
Phone0410543094
Emailashandliss@optusnet.com.au
Address3 Gimbal Ct, Wurtulla QLD 4575
Estimated start dateMay 10, 2021
Same as insured customerYes
Work order forOther SunSmart Sunshine Coast
Work order number3GimbalCt
Is edge protection neededYes
Is scaffolding neededNo
Building layoutDouble Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateMay 10, 2021
Is the system operationalYes
System output in watts4200
Time of recording9:30 am
WeatherSunny
How many inverters are installed1
Total no. phases2 Phases
Inverter 1 size in watts5000
Inverter 1 brandHuawei
Inverter 1 Serial Number2101073796HVHA000056
Does the inverter need replacement?No
String voltage366
String amps6.1
String voltage300
String amps4.5
Isolated before work?Yes
Roof typeTin
Roof Pitch15-30
Condition of whole roofGood
No. of array orientations3
Array 1 orientationNorth
No. of panels in array 115
Array 2 orientationEast
No. of panels in array 23
Array 3 orientationWest
No. of panels in array 33
Total no. panels21
Total PanelsTotal Number of Panels: 21
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandRisen
Panel Brand 1 Panel output315
Calc system size6615
Is racking re-usableYes
Number of isolator covers2
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?Yes
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
NameDavina Boyle
Phone0447005288
Emaildavina_boyle26@hotmail.com
Address208 Main Road, MAROOCHYDORE QLD 4558
Estimated start dateJuly 10, 2021
Same as insured customerYes
Work order forQAT
Work order number53835
Is edge protection neededYes
Is scaffolding neededNo
Building layoutDouble Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateJuly 27, 2021
Is the system operationalYes
System output in watts1750
Time of recording7:30 am
WeatherSunny
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts6000
Inverter 1 brandSofar Solar
Inverter 1 Serial NumberSB1ES060H7R266
Does the inverter need replacement?No
String voltage466
String amps2.1
String voltage387
String amps2.2
Isolated before work?Yes
Roof typeTin
Roof Pitch0-15
Condition of whole roofGood
No. of array orientations1
Array 1 orientationNorth
No. of panels in array 126
Total no. panels26
Total PanelsTotal Number of Panels: 26
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandCanadian Solar
Panel Brand 1 Panel output300
Calc system size7800
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers2
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?Yes
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesInverter mppt plugs are loose
Aditional Uploads
NameGreg Burns
Phone0404141623
Emailbgburns@aapt.net.au
Address8 Oconnor St, Maroochydore QLD 4558
Estimated start dateSeptember 3, 2021
Same as insured customerYes
Work order forQAT
Work order number53880
Is edge protection neededYes
Is scaffolding neededNo
Building layoutDouble Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateSeptember 3, 2021
Is the system operationalYes
System output in watts2565
Time of recording1:30 pm
WeatherSunny
How many inverters are installed1
Total no. phases3 Phases
Inverter 1 size in watts3000
Inverter 1 brandAurora
Inverter 1 Serial Number110997
Does the inverter need replacement?No
String voltage456
String amps7
String voltage0
String amps0
Isolated before work?Yes
Roof typeTin
Roof Pitch0-15
Condition of whole roofMinor Damage
Is the solar system affected?Direct Impact
No. of array orientations1
Array 1 orientationWest
No. of panels in array 122
Total no. panels22
Total PanelsTotal Number of Panels: 22
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandTrine
Panel Brand 1 Panel output185
Calc system size4070
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers1
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesCables, no roof top isolator
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamageOther
OtherIsn’t present
Do Inverter DC Isolators need replacingYes
Inverter DC Isolator DamageNon Compliant
Do AC Isolators need replacingNo
System un-isolated after workNo
NameNick Jackson
Phone0400064315
Emailfluentjackson@gmail.com
Address22 Troywood Cres, Buderim QLD 4556
Estimated start dateOctober 26, 2021
Same as insured customerYes
Work order forOther SunSmart Sunshine Coast
Work order numberNick Jackson
Is edge protection neededYes
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateOctober 26, 2021
Is the system operationalYes
System output in watts1400
Time of recording10:00 am
WeatherCloudy
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts5000
Inverter 1 brandGrowatt
Inverter 1 Serial NumberQQ14460010
Does the inverter need replacement?No
String voltage260
String amps6
String voltage213
String amps6
Isolated before work?Yes
Roof typeTin
Roof Pitch15-30
Condition of whole roofGood
No. of array orientations2
Array 1 orientationNorth
No. of panels in array 18
Array 2 orientationNorth
No. of panels in array 212
Total no. panels20
Total PanelsTotal Number of Panels: 20
Is there rubbish or glass on the roof?No
max necisary0
No. panel brands1
Panel Brand 1 BrandTopsola
Panel Brand 1 Panel output250
Calc system size5000
ReasonNo need
Number of isolator covers2
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesNo isolator covers, DC isolator top entry
Do Rooftop DC Isolators need replacingNo
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
NameTest Name
Phone0400000000
EmailTesting@gmail.com
Address6 Mill Road Buderim
Estimated start dateFebruary 19, 2021
Same as insured customerYes
Work order forQAT
Work order number600000
Is edge protection neededNo
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
DateNovember 17, 2021
Is the system operationalNo
Why is the system not operational?Inverter showing fault code
Please supply the fault code*fsf
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts300
Inverter 1 brandOMNIK
Inverter 1 Serial NumberAUEN3020153G4095
Does the inverter need replacement?Yes
Reason for replacementWeather event
String voltage300
String amps1
String voltage200
String amps1.5
Isolated before work?Yes
Roof typeTin
Roof Pitch0-15
Condition of whole roofMinor Damage
Is the solar system affected?Indirect Impact
No. of array orientations2
Array 1 orientationSouth
No. of panels in array 13
Array 2 orientationNorth
No. of panels in array 29
Total no. panels2064206720702073
Total PanelsTotal Number of Panels: [2074]
Is there rubbish or glass on the roof?Yes
max necisary2109
No. panel brands1
Panel Brand 1 BrandRec
Panel Brand 1 Panel output50
Calc system size4396880
Have you checked rails, mid & end clamps?Yes
Is racking re-usableYes
Number of isolator covers1
Number of damaged isolator covers2
Photo of damaged Isolator Covers
Is the system up to current AS/NZS Standards?Yes
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamagePerished from sun damage
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingYes
AC Isolator DamageCracked
System un-isolated after workYes
Aditional Notesdxsdfsfs
Aditional Uploads
NameTest Name
Phone0400000000
EmailTesting@gmail.com
Address6 Mill Road Buderim
Estimated start dateFebruary 19, 2021
Same as insured customerYes
Work order forQAT
Work order number600000
Is edge protection neededNo
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
Is the system operationalYes
System output in watts600
Time of recording6:30 am
WeatherSunny
How many inverters are installed1
Total no. phasesSingle
Inverter 1 size in watts300
Inverter 1 brandOMNIK
Inverter 1 Serial NumberAUEN3020153G4095
Does the inverter need replacement?No
String voltage300
String amps1
String voltage200
String amps1.5
Isolated before work?Yes
Roof typeTin
Roof Pitch0-15
Condition of whole roofGood
No. of array orientations1
Array 1 orientationNorth
No. of panels in array 13
Total no. panels2064206720702073
Total PanelsTotal Number of Panels: [2074]
Is there rubbish or glass on the roof?No
Has the rubbish or glass been cleaned up?Yes
max necisary2109
No. panel brands1
Panel Brand 1 BrandRec
Panel Brand 1 Panel output50
Calc system size4396880
Have you checked rails, mid & end clamps?Yes
Is racking re-usableYes
Number of isolator covers2
Number of damaged isolator covers8
Photo of damaged Isolator Covers
Is the system up to current AS/NZS Standards?No
Cablesasdead
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamageNot water tight
Do Inverter DC Isolators need replacingYes
Inverter DC Isolator DamageNot water tight
Do AC Isolators need replacingYes
AC Isolator DamageOther
Othersadsa
System un-isolated after workNo
Aditional Notessadsa
Aditional Uploads
NameHelle & Jeff Pitman
Phone0447599581
Emailshane@qat.com.au
Address81 Woombye Palmwoods Rd, Woombye QLD 4559, Australia
Estimated start dateNovember 19, 2021
Same as insured customerYes
Work order forQAT na
Work order number60394
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateNovember 26, 2021
Is the system operationalYes
System output in watts6000
Time of recording12:30 pm
WeatherSunny
How many inverters are installed1
Total no. phases3 Phases
Inverter 1 size in watts5000
Inverter 1 brandAurora
Inverter 1 Serial Number1350680515
Does the inverter need replacement?No
String voltage330
String amps12.8
String voltage0
String amps0
Isolated before work?Yes
Roof typeTin
Roof Pitch15-30
Condition of whole roofGood
No. of array orientations1
Array 1 orientationWest
No. of panels in array 124
Total no. panels2064206720702073
Total PanelsTotal Number of Panels: [2074]
Is there rubbish or glass on the roof?No
Has the rubbish or glass been cleaned up?Yes
max necisary2109
No. panel brands1
Panel Brand 1 BrandN/A
Panel Brand 1 Panel output250
Calc system size4396880
Have you checked rails, mid & end clamps?Yes
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers1
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesIsolator shrouds
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamagePerished from sun damage
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesPanel labels have perished. 200-250w assumed
NameHelle & Jeff Pitman
Phone0447599581
Emailshane@qat.com.au
Address81 Woombye Palmwoods Rd, Woombye QLD 4559, Australia
Estimated start dateNovember 19, 2021
Same as insured customerYes
Work order forQAT na
Work order number60394
Is scaffolding neededNo
Building layoutSingle Storey
Work order typeInspection
Is Make Safe approved if requiredNo
DateNovember 26, 2021
Is the system operationalYes
System output in watts6000
Time of recording12:30 pm
WeatherSunny
How many inverters are installed1
Total no. phases3 Phases
Inverter 1 size in watts5000
Inverter 1 brandAurora
Inverter 1 Serial Number1350680515
Does the inverter need replacement?No
String voltage330
String amps12.8
String voltage0
String amps0
Isolated before work?Yes
Roof typeTin
Roof Pitch15-30
Condition of whole roofGood
No. of array orientations1
Array 1 orientationWest
No. of panels in array 124
Total no. panels2064206720702073
Total PanelsTotal Number of Panels: [2074]
Is there rubbish or glass on the roof?No
Has the rubbish or glass been cleaned up?Yes
max necisary2109
No. panel brands1
Panel Brand 1 BrandN/A
Panel Brand 1 Panel output250
Calc system size4396880
Have you checked rails, mid & end clamps?Yes
Is racking re-usableNo - Corrosion, Seized or bent
Please clarify the issueSeized
Number of isolator covers1
Number of damaged isolator covers0
Is the system up to current AS/NZS Standards?No
CablesIsolator covers
Do Rooftop DC Isolators need replacingYes
Rooftop DC Isolator DamagePerished from sun damage
Do Inverter DC Isolators need replacingNo
Do AC Isolators need replacingNo
System un-isolated after workYes
Aditional NotesPanel labels have perished. 200-250w assumed

RE: 6 Mill Road Buderim


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• Racking• 4 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 21 Lanata Crescent, Mountain Creek QLD, Australia


To Other SunSmart Sunshine Coast,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:

• 0 Isolator Covers
• AC Isolators

Items that require replacing:
• Inverter 1

• Racking
• 2 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 72 Ningi Esp, Ningi QLD 4511, Australia


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• Racking• 2 Isolator Covers
• AC Isolators

Items that require replacing:

• Rooftop DC Isolators
• Inverter DC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 14 Wattle Grove Dr, Ningi QLD 4511, Australia


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1
• Inverter 2

• 2 Isolator Covers
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking
• Rooftop DC Isolators
• Inverter DC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 2-8 Wrenaus Way, NINGI QLD 4511


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1
• Inverter 2

• 2 Isolator Covers
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking
• Rooftop DC Isolators
• Inverter DC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 22 Bass Ct, Banksia Beach QLD 4507, Australia


To Other SunSmart Sunshine Coast,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• 1 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 91-93 Cocos Dr, Ningi QLD 4511, Australia


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• 2 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators

Items that require replacing:

• Racking
• AC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 19-21 Hirst Court, Ningi QLD 4511, Australia


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1
• Inverter 2

• 2 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 12-14 Muldoon Place, Ningi QLD 4511


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• Racking• 1 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 3 Gimbal Ct, Wurtulla QLD 4575


To Other SunSmart Sunshine Coast,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• Racking• 2 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 208 Main Road, MAROOCHYDORE QLD 4558


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• 2 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 8 Oconnor St, Maroochydore QLD 4558


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• 1 Isolator Covers
• AC Isolators

Items that require replacing:

• Racking
• Rooftop DC Isolators
• Inverter DC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 22 Troywood Cres, Buderim QLD 4556


To Other SunSmart Sunshine Coast,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• 2 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 6 Mill Road Buderim


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:

• Racking• -1 Isolator Covers
• Inverter DC Isolators

Items that require replacing:
• Inverter 1

• 2 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 6 Mill Road Buderim


To QAT,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• Racking• -6 Isolator Covers

Items that require replacing:

• 8 Isolator Covers
• Rooftop DC Isolators
• Inverter DC Isolators
• AC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 81 Woombye Palmwoods Rd, Woombye QLD 4559, Australia


To QAT na,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• 1 Isolator Covers
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking
• Rooftop DC Isolators
• Inverter DC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

RE: 81 Woombye Palmwoods Rd, Woombye QLD 4559, Australia


To QAT na,

An Inspection was performed on the above listed property on;

February 16, 2021February 16, 2021February 27, 2021February 17, 2021February 17, 2021February 17, 2021February 17, 2021March 10, 2021March 2, 2021March 2, 2021March 2, 2021March 17, 2021April 24, 2021July 27, 2021September 3, 2021October 26, 2021November 30, 2021November 23, 2021November 26, 2021

Background Information

BackgroundSpecialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.Background Information InformationBackgroundTest- Report with thermal images of panels Future works – Remove 26 x existing solar panels and store onsite to facilitate roof replacement. – Reinstall 26 x existing solar panels following roof replacementRemove and replace solar inverter to best match existing – Provide separate quote for any upgrades- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report of 10 x existing solar panels – Use Thermal camera to check for unseen damage to Solar Panels.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Allowance to carry out solar report on all solar systems common with main roof area to inspect for any damage and comment on whether damage is consistent with hail event. Please note if solar systems are found to be damaged as a result of the storm event a variation will be submitted. Remove and reinstate 23 x solar panels (including fixing rails) common with LHS and RHS elevations of main roof to best match existing to facilitate roof replacement. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted. Remove and replace 8 x solar panel system common with middle section of front elevation of main roof to best match existing size and brand to best match existing. Subject to inverter/solar panel compatibility. Please note if further work is needed to bring system up to code when reinstating a variation will be submitted.Test- Solar system Report with thermal imagesCustomer was made aware from contractor doing work at neighbours house that they had a smashed solar panel on the Roof.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.Specialist trade to attend site and use thermal camera to check for any un seen hail damage. Provide a compliance report on the existing solar power system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage or should any upgrades be required.- Inspection & Report – Use Thermal camera to check for unseen damage to Solar Panels.Customer noticed system was not performing correctly and requested a system inspection. On inspection it was found to have a smashed panel, and bypassed smashed panel.System removalMake safeInspectionSystem removalSystem removalInspection

Testing/Work carried out

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Specialist trade to attend site and provide a compliance report on the existing Solar Power, system prior to removal. The report is to identify any required compliance upgrades to meet current industry regulations. Please supply a detailed quote should any upgrades be required. Remove then refit 32x solar panels to the roof.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:
– System is only a few months old

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:

– Use thermal camera to check for any un seen hail damage.
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
No allowance has been included for any potential required compliance upgrades to meet current industry regulations. Should our compliance report identify any required upgrades the additional cost will be submitted as a variation prior to removal of the existing panels.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

Extra notes:
– Use Thermal camera to check for unseen damage to Solar Panels.
– Get Length and Width of Solar Pool Heating

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Use Thermal camera to check for unseen damage to Solar Panels.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
Extra notes:

Specialist trade to attend site and use thermal camera to check for any non-visible hail damage.

Provide a compliance report on the existing solar power system prior to removal.

The report is to identify any required compliance upgrades to meet current industry regulations. Supply a detailed quote and report for any hail damage
or should any upgrades be required

Description of approved works:
– Attend site and inspect solar system for any unseen damage and whole of system performance.
– Provide a compliance report on the existing Solar system and all components.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.

ddd

ddd

dfsfssefv   fsefssf

dadas   dadadad

why? test..

Description of approved works:
– Attend site and inspect solar panels for any unseen damage prior to removal.
– Provide a compliance report on the whole existing Solar system.
(The report is to identify any damage or system components needed to be replaced to reinstall system to correct working order as well as any required compliance upgrades to meet current AS/NZ Standards.)
– Before & After photos to be taken (Mandatory)
– Any damage to system or property is to be reported immediately with photos, explaining how, why, who and if at fault our rectification options if needed.
– Remove 23 x existing solar panels, system racking and store onsite to facilitate future roof replacement.
– Reinstall 18 x existing solar panels following roof replacement works completion.
– Supply and install new solar panels. (5 items) (Subject to onsite visit to match and source compatible panels for existing system)
– Any smashed solar panels should be removed from site and disposed of appropriately.
– All rubbish to be picked up and removed off site.
Extra notes:
– 5 x panels already removed at make safe. 18 x panels removed @ time of this work order.
– Total panels to be re-installed is 23 x solar panels following roof replacement works completion.

ASDF ASD DFSA SADF SD SDFA

na

Summary & Recommendation

On inspection the solar system was not operational or found to be under performing due to ____________.Full information can be found in the attached detailed report.

Items able to be reinstalled:
• Inverter 1

• 1 Isolator Covers
• Inverter DC Isolators
• AC Isolators

Items that require replacing:

• Racking
• Rooftop DC Isolators
• Inverter DC Isolators

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

Working Panels

0 Damaged Panels

5.00